No.

Title of Conference Paper

1.

Teo Cheng Yu, Low Kok Hing, "A Theoretical Assessment of Spinning and Static Reserve", Far East Conference on Electric Power Supply Industry (CEPSI '78), Hong Kong, PP C.06, December, 1978.

2.

Teo Cheng Yu, "Determination of Optimal Generation Expansion in ASEAN Countries", Proc-1st Convention of Engineering Institutions of South East Asian Nations, Malaysia, PP 5.1, December 1978.

3.

Teo Cheng Yu, "Real-Time Energy Management of Power System", Proc-Conference on Electric Power Supply Industry (CEPSI '80), Malaysia, PP G17.1, June 1980.

4.

Teo Cheng Yu, Yeo Yek Seng, Lee Yau On, "Software Structure of an On-Line System Control Centre", Proc-Conference on Electric Power Supply Industry (CEPSI '80), Malaysia, PP G21.1, June 1980.

5.

Teo Cheng Yu, "Power Generation and Continuity of Supply in Asean Countries", Proc-2nd Conference of Asean Federation of Engineering Organizations (CAFEO 2), Bangkok, PP 41 - 56, January 1984.

6.

Teo Cheng Yu, "Supervisory Control of Electrical Installation Using Microcomputer, Proc-Conference on Electric Power Supply Industry (CEPSI '84), Manila, PP 4.01, November, 1984.

7.

Teo Cheng Yu, Phneah, P.K., Loh J K, "Generalized Microcomputer Applications for Supervisory Control & Energy Management", Proc-IEE 2nd International Conference on Power System Monitoring and Control, PP 251-255, July, 1986.

8.

Teo Cheng Yu, "Evaluation of Load Management Effects on Energy Cost", Proc-Seminar on Energy and Load Management, Singapore, PP 1 - 15, December 1986.

9.

Teo Cheng Yu, "Global Approach for Energy Supply System to a Special Economic Zone", Prof-4th Asean Energy Conference, Singapore, PP 864-883, November, 1987.

10.

Teo Cheng Yu, Lee Yau On, "Determination of Transmission Voltage for a 8GW System in an Island", Proc-International Conference on Large High Voltage Electric System, CIGRE Regional Meeting, Sydney, PP 3.3, November, 1987.

11.

Teo Cheng Yu, "CAD for Electrical Installation in Building, Proc-CAD/CAM Conference, UK, PP 337-342, March, 1987.

12.

Teo Cheng Yu, Wong Tai Kiang, "SCADA and EMS using Microcomputer", Proc-Seminar on Energy Conservation and Load Management, Singapore, PP 69 - 91, August, 1987.

13.

Teo Cheng Yu, "Factors that Determine the cost of Energy", Proc-6th Conference of Asean Federation of Engineering Organizations (CAFEO-6), Brunei, PP 101-105, January, 1988.

14.

Teo Cheng Yu, Chan Tat Wai, "Automate Backup Protection Setting and Software Injection Test", Proc-7th Conference on Electric Power Supply Industry (CEPSI '88), Australia, PP 3.19, October 1988.

15.

Teo Cheng Yu, Chan Tat Wai, "Overall Assessment of Distribution Backup Protection Using Microcomputer", Proc-IEE 4th International Conference on Development in Power Systems Protection, UK, PP 107 - 112, April, 1989.

16.

Teo Cheng Yu, Ho Hiang Kwee, "Real-time Knowledge-Based Power Plant Efficiency Monitoring System", Proc-IASTED International Conference on Control, Switzerland, PP 141-144, June, 1990.

17.

Teo Cheng Yu, Tan Chee Heng, Chutatape Opas, "SCADA for Power Distribution and Building Automation Systems", Proc-ISMM International Symposium on Mini and Microcomputers and Their Applications, Switzerland, PP 223-226, June, 1990.

18.

Chan Tat Wai, Chin Teck Chai, Teo Cheng Yu, "A Harmonic Synthesizer for Watt-hour Meter Testing", Proc-ISMM International Symposium on Mini and Microcomputers and Their Applications, Switzerland, PP 132-135, June, 1990.

19.

Teo Cheng Yu, "Minimise Energy Production Cost Through Knowledge Engineering", Proc-Seminar on Energy and Environment, Singapore, PP 1-7, September, 1990.

20.

Teo Cheng Yu, Tan Chee Heng, Chutatape Opas, "A Prototype for an Integrated Energy Automation System", IEEE Industrial Applications Society Annual Meeting, USA, PP 1811-1818, October, 1990.

21.

Lee K A, Teo Cheng Yu, Yee H, "An Improved Load Frequency Control Algorithm", Proc-8th Conference on Electric Power Supply Industry (CEPSI '90), Singapore, PP 5.21, November, 1990.

22.

Yong Y C, Teo Cheng Yu, Yu T M, "Microcomputer-Based Real-Time Plant Efficiency Monitoring System", Proc-8th Conference on Electric Power Supply Industry (CEPSI '90), Singapore, PP 2.01, November 1990.

23.

Ypsilantis J, Teo Cheng Yu, Yee H, "Real-Time Knowledge-Based System for SCADA", Proc-8th Conference on Electric Power Supply Industry (CEPSI '90), Singapore, PP 4.27, November 1990.

24.

Yee H, Teo Cheng Yu, Jpsilantis J, "Expert Systems and the Teaching of Electrical Power Distribution", Proc-2nd Conference on the Australian Association for the Engineering Education, Australia, PP 437-441, December, 1990.

25.

Teo Cheng Yu, "A New Attempt to Teach Power Engineering Interactively", Proc-2nd National Electrical Power Engineering Conference, Malaysia, PP 207-214, June 1991.

26.

Teo Cheng Yu, Chan Tat Wai, "Interactive Power Restoration Simulator Using a Microcomputer", Proc-IEE 3rd International Conference on Power System Monitoring and Control, London, PP 115-117, June 1991.

27.

Teo Cheng Yu, "An Integrated Tool for Distribution System Operational Planning and Restoration", Proc-2nd International Symposium on Electricity Distribution and Energy Management, Singapore, October 1991.

28.

Teo Cheng Yu, "Microcomputer-based Interactive Distribution System Simulator for Operational Planning, Relay Setting and Engineer Training", Proc-International Conference on Advances in Power System Control, Operation and Management, Hong Kong, November 1991.

29.

Chutatape Opas, Teo Cheng Yu, "An Implementation of a Nine-bit Communication Protocol for Distributed Data Acquisition Controller", Proc-International Conference on Information Engineering, Singapore, December 1991.

30.

Teo Cheng Yu, "Determination of Investment for Electricity Supply in New Industrial Development", Proc-Seminar on Energy Options for Growth and Development, Singapore, March 1992.

31.

Teo Cheng Yu, Gooi Hoay Beng, "Strategies for Energy Supply Undertaking", Proc-SNCWEC SA ASIA Energy Conference, Singapore, June 1992.

32.

Teo Cheng Yu, Lee Tat Man, Koh L H, "Microcomputer-based Power System SCADA Simulator for Education", Proc-Canada Conference on Industrial Automation, Canada, June 1992.

33.

Teo Cheng Yu, "Machine learning of Rules for Fault Diagnosis in Electrical Power Network", Proc-IEEE International Workshop on Emerging Technologies and Factory Automation, Melbourne, Australia, August 1992.

34.

Teo Cheng Yu, Kwok W K, Lee C C, "Application of AI Techniques for Fault Diagnosis in Power Distribution System", Proc-International Conference on Intelligent Systems Engineer, United Kingdom, August 1992.

35.

Chan Tat Wai, Teo Cheng Yu, "A Portable Electronic Energy Meter for Consumption Measurement", Proc-International Symposium on Consumer Electronics, China, October 1992.

36.

Teo Cheng Yu, Chan Tat Wai, Gooi Hoay Beng, "An Innovative Microcomputer-based Integrated Package for Teaching of Electrical Installation Network", Proc-Australasia University Power and Control Engineering Conference, Brisbane, Australia, October 1992.

37.

Teo Cheng Yu, Chan Eng Kiat, "Application of AI Techniques for Power Restoration in Distribution System", Proc-9th Conference on Electric Power Supply Industry (CEPSI '92), Hong Kong, November 1992.

38.

Chan T. W., Teo C. Y., Wong K. H., Peh B. C., "Reviving the Conventional kWh Meter into an Intelligent Meter", Proc-International Power Engineering Conference, Singapore, March, 1993.

39.

Teo C. Y., Wong A. C. B., Ho H. K., "Using Expert System Shell to Develop Power Plant Simulator", Proc-Global Generation Exhibitions and Conferences (Power-Gen'93), September, 1993.

40.

Wong I. H., Teo C. Y., "Pumped Storage Scheme in Singapore", Proc-Global Power Generation Exhibitions and Conferences (Power-Gen'93), September, 1993.

41.

Teo C. Y., "Computer-aided Hands-on Design Exercise for Electrical Installation", Proc-3rd International Symposium on Electricity Distribution and Energy Management, October, 1993.

42.

Teo C. Y., Chan T. W., Kong C. S., "A New Approach of Teaching Overcurrent Protection through a Training Simulator", Proc-Australasian Universities Power Engineering Conference (AUPEC'93), Australia, October, 1993.

43.

Gooi H. B., Teo C. Y., Chin L., "Adaptive Short-term Load Forecasting using Artificial Neural Network", Proc-IEEE Region 10 International Conference on Communication, Control and Power E.ineering, Beijing, China, October, 1993.

44.

Teo C. Y., Gooi H. B., "Automated Restoration in Distribution Network", Proc-2nd International Electricity Distribution Conference (Distribution 2000), Australia, November 1993.

45.

Wong A. C. B., Teo C. Y., Ho H. K., "Developing Knowledge-based System to Improve Power Plant Efficiency", Proc-International Conference in Power System Control, Operation and Management, Hong Kong, December, 1993.

46.

Ho H. K., Wong A. C. B., Teo C. Y., "Development of Real-time Expert System for Monitoring and Diagnosis of a Steam Power Plant", Proc-10th Conference on Electric Power Supply Industry (CEPSI94), New Zealand, September 1994.

47.

He W X, Teo C Y, "Unbalanced short-circuit Calculation by Phase Coordinates", International Conference on Energy Management and Power Delivery, November, 1995

48.

Jiang W, Teo C Y, "A Knowledge-based Approach for Bulk Power System Restoration", International Conference on Energy Management and Power Delivery, November, 1995

49.

Teo C Y, "New Computing and Simulation Tools for Power System Operation and Training", Proc-International Power Engineering Conference, PP 92-97, May, 1997

50.

F. Shen and C. Y. Teo, "Visually Interactive Approach to Assess Electrical Systems in Buildings", International Power Engineering Conference, 1999

51.

C. Y. Teo and F. Shen, "Application of Artificial Intelligence in the Design of Low Voltage Electrical System", Power Engineer Society, IEEE Winter Meeting, pp 1784-1789, Vol.  3, 2000

52.

C. Y. Teo and F. Shen, "Visually Integrated Modelling for Distribution Network Operation and Planning", Power Engineer Society, IEEE Winter Meeting, pp 937-941, vol. 2, 2000.

53.